 |
 |
LIST | 100-Series | 200-Series |
300-Series | 400-Series
| 500-Series |
600-Series | 700-Series |
800-Series |
Floating Fountains
| Replacement Parts |
|
|
|
| « Back To 800-Series | Your Shopping Cart |
|
|
|
|
871-Series WET-PAK Pump Kits
The 871 Series WET-PAK submersible pump kit
offers a unique alternative to the traditional above-floor
submersible fountain pumping system by moving the pump
and plumbing from plain view and into a flush mount, prefabricated,
stainless steel pump pit. This reduces clutter
on the fountain floor leaving your eyes to focus on the
fountain feature, not the pumping system.
The WET-PAK also features a removable fibermat filter
element that screens debris from the water, preventing
clogging of the pump and piping. And, to protect your
investment in case someone enters the fountain, all WETPAKS
come with a fiberglass grating cover that can hold
the weight of a person.
WET-PAK Pump Kits arrive at the job-site pre-assembled
with pump, cord seal(s) and/or underwater junction box,
discharge ball valve, drain fitting with plug, and 3/4” fitting for connection of fill piping. Once the plumbing and
electrical connections have been made, and the fountain
structure poured, the WET-PAK is ready for operation.
Control of the WET-PAK is typically handled by mounting
a mechanical time clock or simple on/off switch in a
convenient location near the fountain. Contact our office
for order and price information on electrical controls.
(NOTE: All power to the WET-PAK must be protected by
a Class A ground fault interrupter device).
|
|
|
|
|
|
|
|
|
|
| #871-1070A WET-PAK |
$ |
1463.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1/7 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. No lighting hookups. |
|
| #871-1070B WET-PAK |
$ |
1403.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1/7 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for one light fixture. |
|
| #871-1070C WET-PAK |
$ |
1637.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1/7 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for two light fixtures. |
|
| #871-1030A WET-PAK |
$ |
1566.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1/3 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for NO light fixture. |
|
| #871-1030B WET-PAK |
$ |
1728.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1/3 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for one light fixture. |
|
| #871-1030C WET-PAK |
$ |
1727.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1/3 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for two light fixtures. |
|
| #871-1230A WET-PAK |
$ |
1670.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 2/3 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for NO light fixture. |
|
| #871-1230B WET-PAK |
$ |
1967.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 2/3 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for one light fixture. |
|
| #871-1230C WET-PAK |
$ |
1975.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 2/3 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for two light fixtures. |
|
| #871-1100A WET-PAK |
$ |
1866.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for NO light fixture. |
|
| #871-1100B WET-PAK |
$ |
2027.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for one light fixture. |
|
| #871-1100C WET-PAK |
$ |
2023.00 |
|
| 14 Gauge stainless steel in-slab box, approximately 2'-6" long x 1'-1" wide x 1'-1" deep, with waterstop flange; two 1-1/2" N.P.T. connections; one 3/4" N.P.T. connections; and one 1/4"-20 SS bonding screw assembly. The 2'-6" x 1'-0" top opening is covered by a drop-in black plastic fibermat screen, supported by a 1" thick fiberglass grating with 1-1/2" square openings. Factory-installed inside the box is a 1-1/2" brass plug for drainage, a 1/2" polyamide plastic cord seal for the pump cord, and a 1 horsepower, 115 volt, single phase stainless steel submersible pump with a 1-1/4" true-union PVC ball valve for discharge control. Electrical for two light fixtures. |
|
|
